One of the biggest issues on every 8E chassis Audi is the rubberized finish on everything your greasy hands touch. My window switches and my driver’s side handle shell were starting to peel and look gross, so I decided it was time for a replacement. Parts: Driver’s side handle shell: 8E1 867 171 C 7PE ..
The right side hinge on my glove box door broke and I didn’t want to pay $300 to replace the entire glove box, so I did a few searches and found an AZ member who sells hinge repair kits… His name is Fritz and he goes by PCYC. I figured “what the hell” and ordered ..
What you need: Time: ~30-45 minutes per downpipe. Tools: Drill (corded and variable speed preferred) Long thick flat head screw driver OR flat punch Any type of deburring bit will work, I recommend one that’s designed for wood rather than metal/concrete this will insure the exhaust pipes don’t get too roughed up. Most are expensive, ..
Ok so there have been some posts on changing the trans pan filter and gaskets along with the fluid. Here is a brief over view to help you out. First off there are several fluids that you can change to. But if your not beating the car up at the track. I would just use ..
I replaced the steering rack on my B6 S4 for the second time and made this DIY on how to go about it. TIME/DIFFICULTY 6-10hrs depending on your prep and pace Medium difficulty range No special equipment needed PARTS ₪ ZF Steering Rack [new, rebuilt, or used] I bought a rebuilt B7 unit from carsteering.com ..
I have done a ton of searching and found how to accurately program a key fob on the forums. The problem with all the directions that I had found was that once I programmed one key fob, the others would erase. None of the directions showed all the steps to program more than one key ..
After I have seen a few posts with people having cold start or no start issues in the past and the fact that I had a bad starter that needed to be changed I thought I should share this. Ok so for those of you who haven’t seen this yet. From time to time the ..
For those that would like to quickly attach their front plates where for example meter maids are ticket happy (LAX airport springs to mind), here’s the DIY for you. Get yourself some rare-earth magnets from ebay, or your local rare-earth magnet store! There are many to choose from but I got 1/8″ thick by 1″ ..