Category : B8

I know there’s a thread floating around showing how B8 ecodes are installed and it’s very useful, very similar. There are only slight differences between the two but I figured i’d make one anyway because I have too much time on my hands right now. This is also my first DIY write-up so if it’s ..

Read more

The factory line from Audi has a pressure valve in to ease engagement. This valve wears out our clutches faster as engagement is over a longer period of time regardless of driver finesse and also KILLS pedal feel. USP sells a great stainless line replacement. LinkClutch feel is awesome with the line. Below is a ..

Read more

Just finished installing my Escort 8500 X50 in my S4 and snapped some pictures. The idea with the dome light hookup came from ELEVENS’s thread in the Q5 forum. Instead of buying and modifying a cable from Escort, I decided to make a custom harness from scratch. 1. Tools I used * Torx T25 screwdriverto ..

Read more

Had to do my brakes today and couldn’t find a decent online DIY so I figured I would create one as I went along. Brakes are Brakes for the most part but each car has their quirks and I am hear to outline the B8’s First things first, I am not responsible for any damage ..

Read more

Installation instructions for Roc-Euro’s 3.0T Intake System (Fits B8 S4, A4, A5, S5, Q5 with 3.0T or 3.2L V6) We appreciate your purchase of the high-performance Roc-Euro Intake System for your supercharged Audi S4. This is the intake that started it all. One that has a custom fit, and makes real power. Make sure you ..

Read more

I think the B&O system sounds great but find the bass just a little bit lacking. I’m not looking for big, boomy bass, but I do want to hear all of the notes in my music, including the ones below 60hz. After reading the following guides for the S5 and the improvement people were hearing ..

Read more

The installation of your 034Motorsport Transmission Mount Insert for the B8 Audi A4/S4/RS4 & A5/S5/RS5 is a relatively simple process that will take approximately 20-30 minutes to complete. This billet aluminum insert is designed to fill the large void in the factory transmission mount, and limit transmission movement without sacrificing ride quality. By filling the void ..

Read more